Nox Rust 5300 503 LS Internal Coating : Corrosion Control Coatings

Nox-Rust 5300 (Nox-Rust 503 LS) Internal Corrosion Protection Coating

• Nox-Rust 5300 503LS corrosion inhibitor coating for displacing water or saline solution from metal surfaces and to prevent corrosion
• Corrosion control coating for interior surfaces of machinery, tanks and ballasts
• Protects bare steel or phosphated surfaces interiors or packaged metals for extended periods
• Can be used as a float coat for tanks and ballasts
• Completely miscible with oils eliminating the requirement for removal for many applications
• Dilutable with oils and non polluting
• Excellent oil-based rust preventive for indoor or outdoor covered (sheltered exposures)
• Low VOC
• Soft moisture displacing film can be applied by spray, brush, dip, flow/flush or float coat
• Removable with conventional cleaning fluids, solvents, alkaline detergent wash or mineral spirits
• Setting time is 30 to 45 minutes
• Applied thickness is 0.4 mil
• Nox-Rust 5300 503 LS is on the qualified products list (QPL) for Mil PRF-16173 Rev. E Grade 3, Class 1

Laboratory Test Results

• Extended corrosion protection of bare steel and phosphated surfaces with additional barrier materials
• Outdoor covered storage corrosion protection 6 months
• Corrosion protection at 100% relative humidity 120 F 30 days
• Nox-Rust 5300 503 LS is on the qualified products list (QPL) for Mil PRF-16173 Rev. E. Grade 3 Class 1

Package: 5 US gallon pail, 6 Aerosol Cans and 55 gallons (208 liters)